Filter
Top Products
Setting the Controls
Operating your dishwasher’s controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. The dishwasher starts filling once you press a cycle pad unless you
select the delay wash cycle. You may press Option pads as the machine is filling.
T
T
CYCLE
ihow: iv vhat each cycle includes
CYCLE
TIME
Minutes,
3INSE
WAIN
VA!3
FINAL
3INSE
3INSE
RINSE/WASH LATER
12
60’
.
.++
during Rinsemash Later.
l Air Dry is automatically selected.
LOW ENERGY/CHINA
Single wash for prerinsed
or lightly soiled loads.
l Select High Temp Wash
to heat water in the main
wash (marked +).
.+
.
l The water heats to 140°F (60%) in
the final rinse (marked++).
NORMAL
.++
66.
.+
l +
.
.
.
to heat water in the main wash
(marked+).
l The water heats to 140°F (60%) in
the final rinse (marked ++).
POTS-N-PANS
.++
76’
.
.
.
(marked +j.
’
l The water heats to 140°F (60°C) in
the final rinse (marked++).
the dlshwasher. The cooler
Lycle rlme lncluaes ary rime ana may be longer cfependmg on the temperature of water enter
12
the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown