Filter
Top Products
Electronic Display Electronic Display
Program Control Pads Program Control Pads
Selecting an option Selecting an option
Options can be selected by touching the SELECT OPTION Pad. Each touch of the Pad advances the
display to the nex-toption.There are three options available: AIR DRY, HEAT DRY, HI TEMPAII options can
be changed any time when the display is on, including during a program. If the RINSE Program is
selected, Options are not available. If the POTS & PANS Program is selected, only HEAT DRY and AIR DRY
Options are available.
AIR DRY
The AIR DRY Option helps save energy, but the
dishes take longer to dry (overnight] and some
water spotting may result. Some items (such as
plastics) may need towel drying. For best results,
use a liquid rinse aid such as Jet-Drp
HEAT DRY
When HEAT DRY is selected, the air in the dish-
washer is heated during the”dry” portion of any
program - except RINSE.
DELAY Pad
The DELAY Pad allows you to delay the start of a
program from 1 up to 9 hours. Each touch of this
pad adds another hour of delay to the digital
display. After 9 hours, touching the DELAY Pad
wil I change the display back to1 hour. The DELAY
HRS Indicator will show on the display during a
programmed delay. Touch START at any time
during the delay if you want the dishwasher to
start immediately.
When HI-TEMP is selected. the water for the main
wash and final rinse is heated to 145°F (63°C).
The POTS & PANS Program has the HI-TEMP Op-
A Dry Option will
show In tne display with HI TEMP
Be sure to select the desired Dry Option (HEAT
DRY or AIR DRY) in combination with HI TEMP
l
Touch SELECT OPTION Pad until HI TEMP Indica-
tors are shown in the display.
l
Option Indicators will not show in the display if
they can not be selected with a
program;
RlNSE or POTS & PANS.
l
You can change an option while the
program
is running by touching the SELECT OPTlON
Pad.
CANCEL Pad
The CANCEL Pad allows you to cancel a pro-
gram or to clear the display. If the dishwasher is
washing, it will go into a 2 minute drain automat-
ically before shutting off. If the dishwasher had
not been started, it will clear the display.
9