Filter
Top Products
1
HEAT WATER and water temperature are dis-
played when:
l
Water is being heated for both washes and the
final rinse portions of the POTS & PANS program.
l
Water is being heated forthe main wash and the
final rinse portions of other programs WI leII ,, Ib. .
TEMP option has been selected.
l
Temperatures are 90°F or below. The display will
show the actual temperature or 90°F
l
Temperatures increase to 145°F Readings up to
144°F will be displayed. When 145°F is reached,
the temperature is not shown; instead the display
changes to the remaining program time. NOTE:
The program time remains the same while the
water
is
being heated.
A hidden LOCK-OUT pad is located in the center of
the Control Pads. This pad lets you turn off the pro-
gramming tone or lock-out the function of the Con-
trol Pads (except CANCEL).
When the LOCK-OUT
pad
is
pressed and held for
3
or more seconds,
the programming tone will
turn off. The tone will not sound when the pads are
touched or when the door is opened. To turn the
programming tone back on, press and hold the
LOCK-OUT pad for 3 or more seconds.
When the
LOCK-OUT
pad is touched twice within
2 seconds, ‘I” will show in the digital display (for 2
seconds) and all control pad operations (except
CANCEL] and the programming tone will be
locked out. If a control pad is touched while in
LOCK-OUT, the display will show an ‘I” for 2 sec-
onds, This shows you that LOCK-OUT is being used.
To return the control pads and programming tone
to full operation, touch the LOCK-OUT pad twice in
2 seconds. The pads will work again.
To add a dish after starting
r*n ’
1.
To be sure the added item is washed,
make sure the WASHING indicator is stall
on.
3. Open the door and add the dish.
2. To stop the dishwasher, unlatch the door
by pushing in the latch handle under the
control panel. Do not open the door until
the spray arms stop spinning. The DOOR
OPEN indicator will flash and a tone will
beep.
4. Close the door. Do not latch it. Wait 30
seconds for air in the dishwasher to warm
up. This helps reduce the amount of
moisture that can come from the vent
when restarting the program.
5. Push in on the door until it latches. The dish-
washer will restart and continue the
program.