Whirlpool DUC600 Dishwasher User Manual


 
10
Loading Bottom Rack
The bottom rack is designed for plates, pans, casseroles, and
utensils. Many items, up to 13" (33 cm) tall, fit in the bottom rack.
(See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
Do not load glasses, cups, or plastic items in the bottom
rack. Load small items in the bottom rack only if they are
secured in place.
Load plates, soup bowls, etc., between tines.
Overlap the edges of plates for large loads.
Load soup, cereal, and serving bowls in the rack in a variety
of ways depending upon their size and shape. Load bowls
securely between the rows of tines. Do not nest bowls
because the spray will not reach all surfaces.
Load cookie sheets, cake pans, and other large items at the
sides and back. Loading such items in front can keep the
water spray from reaching the detergent dispenser.
Secure heavily soiled cookware face down in the rack.
Make sure pot handles and other items do not stop rotation
of the spray arm(s). The spray arm(s) must move freely.
Do not load items between the bottom rack and the side of
the dishwasher tub because they might block the water inlet
opening.
FLIP AWAY™ plate holders (on some models)
You can fold up all, or part, of the row of V-shaped flexible tines
at the back of the bottom rack. This is useful when washing a
variety of dishes, pots and pans, or roasters.
10 place setting
12 place setting
Utensil load
Mixed load
Place the entire row of tines in the down
position when washing a large number of
plates.
Fold away the plate tines to hold many bowls.
Fold away the entire row of both plate and
bowl tines to make room for larger pans or
roasters.