Filter
Top Products
Before starting your dishwasher
1. Spin the Upper Spray Arm to make sure
nothing will stop it from turning freely
2. Push door firmly when closing and it will
automatically latch. I
I
3. Run hot water at sink nearest dishwasher
until it is hot. Turn it off.
A
:,-
CLEAN SELECTOR BUllONS
Starting your dishwasher
POTS & PANS cycle...
1. Push POTS & PANS Clean Selector Button.
2. Push button for option desired.
3. Turn Cycle Control Knob clockwise to
dot marked POTS & PANS.
- POTS & PANS AND HEAVY WASH Cycles
share the same spot on the dial. The
Clean Selector Button determines
which cycle operates.
The dishwasher will automatically start
that cycle.
NORMAL WASH cycle...
1. Push NORMAL WASH Clean Selector
Button.
2. Push button for option desired.
3. Turn Cycle Control Knob clockwise to
dot marked NORMAL WASH. The dish-
washer will automatically start that
cycle.
RINSE 81 HOLD cycle...
1. Select a Wash Cycle.
2. Select AIR DRY Option only.
3. Turn Cycle Control Knob clockwise to
dot marked RINSE & HOLD. The dish-
washer will automatically start that
cycle.
HEAVY WASH cycle...
1. Push HEAVY WASH Clean Selector Button.
2. Push button for option desired.
3. Turn Cycle Control Knob clockwise to
dot marked HEAVY WASH.
- HEAVY WASH and POTS & PANS Cycles
share the same spot on the dial. The
Clean Selector Button determines
which cycle operates.
The dishwasher will automatically start
that cycle.
LOW ENERGY WASH cycle...
2. Push butfor for option desired.
1. Push NORMAL WASH Clean Selector
3. Turn Cycle Control Knob clockwise to
dot marked LOW ENERGY WASH. The dish-
Button.
washer will automatically start that
cycle.
Changing a setting
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
You can change a setting anytime during
3. Be sure the detergent dispensers are filled
any cycle.
properly for the new cycle.
1.
Press in the door latch to unlatch the door
4. Close and latch the door. The dishwasher will
and stop the cycle.
automatically start the new cycle.
To add a dish after starting
4.
1.
2.
3.
To be sure the added item is washed and
rinsed, make sure the Cycle Control Knob
has not passed LOW ENERGY WASH.
Unlatch the doorto stop the cycle.
Open the door and add the dish.
5.
8
Close the door. Do not latch It. Wait 30 sec-
onds for air in the dishwasher to warm up.
This helps reduce the amount of moisture
that can come from the vent when restart-
ing the cycle.
Latch the door. The dishwasher will start
from where it stopped.