Using your refrigerator
Setting the controls.. .
Controls for the refrigerator and freezer are In the
refrigerator When the refrigerator IS plugged tn for
the first time
Y@ A@)c
3 I -
1 Set the TEMPERA-
2 Set the AIR CON
TURE CONTROL to 3
TROL to B
Changing the control settings...
If you need to adjust temperatures in the refrrger-
l
Adjust the Temperature Control first
ator or freezer, use the settings listed in the chart
l
Walt at least 24 hours between adjustments
below.
l
Then adjust the Air Control, If needed.
CONDITION :
If Refrigerator
Section
IS
TOO WARM
If Freezer
Section is
-
-
I
TOO WARM
QUESTIONS?
,,.ca’l your lf Refrigerator
COOL-LINE ’ Section Is
service TAA ~AI n
Glve the refrlgerator time to cool down com-
pletely before adding food. (This may take sev-
eral hours.]
These settings should be about right for normal
household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream
IS
firm.
DO not block the air outlet on the control panel.
Blocking it can slow the air movement needed to
keep temperatures at the level you set.
REASONS:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your ccndltions
RECOMMENDED SETTINGS:
Temperature Control
Air Control
c”
Temperature Control
Air Control i!
Temperature Control 2
Air Control B
I”” L”L”
assistance
telephone
If ICE isn’t Heavy tee usage
Temperature Control 3
number
MADE FAST ENOUGH
Very cold room temperature Arr Control A
fpaae 151
[can’t cycle often enough]
\, - I
If BOTH SECTIONS Door opened often
Temperature Control
4
are TOO WARM Large amount of food added Air Control B
Very warm or very cold
room temberatures
Power Saving Control.. .
The Power Saving Control on the Control Con-
sole operates electric heater around the door open-
1 Use the “OFF” set- 2. Use the “0N”setting
ings These heaters help keep morsture from forming ting when humidity
if moisture forms
on the outside of the refrigerator.
IS
low
on the outside of the
refrigerator.