Filter
Top Products
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
To remove glass shelves:
your refrigerator. Glass shelves are strong enough to
1. Ilt up at front.
hold bottles, milk and other heavy food items,
2. Lift up at back.
3. Pull shelf straight out.
To replace:
A. Guide the rear hooks into the slots in the shelf
. Glass shelves are
heavy: Be careful.
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing the freezer shelf. . .
,,
1. Lift front slightly.
rllll I
2. Lift back off supports.
3. Replace in reverse order,
Lltt the Front 4
Then the Back
Removing the freezer basket.. .
For proper air movement, keep the freezer basket
in place when the refrigerator is operating,
To remove the basket:
l
Slide out to the stop.
l
Lift the front to clear the stop.
l
Slide out the rest of the way.
To replace the basket:
l
Place basket on the slides.
l
Make sure the wire stops
clear the front of theslides.
l
Slide basket in.
Removing the crispers and crisper covers...
Removing crispers:
1. Slide crispers straight out to stop
2. Lift the front.
3.
Slide the rest of the way out.
4. Replace in reverse order
Removing covers:
Covers are held in by two pegs at
notched tabs in front.
Push the Tab
to Clear
the Cover.
the back and t
1. Press front out of way.
2. Lift cover front.
If necessary, the center leg can be made shorter or
3. Lift back out of pegs.
longer to help level the crisper covers. Turn the leg
4. Replace in reverse order
clockwise to make it longer.Turn the leg counterclock-
wise to shorten it.
6