Filter
Top Products
Moving the meat pan.. .
The meat pan can be taken out and moved the
same way as the shelves. Remove the meat pan first.
Removlng:
I. Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight out.
Replaclng:
I, Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of cover until rear hooks drop into slots.
Lower front of cover to level position.
3. Replace meat pan in reverse order.
Changing the light bulb...
WARNING: Before removlng the light shield for
cleaning or for replacing the bulb,
elther unplug refrigerator or dlscon-
nect electrlclty leading to re-
trlgerator at the main power supply.
Shock and Injury can occur if elec-
tricifv remains connected.
1.
Push in the (
Pull
2.
Push lightly on the top center of the light shield until
the notched tab unhooks from the control panel.
Pull down on the shield until the tab clears the con-
trol panel.
3.
Lift the back hooks out of their slots.
4.
Replace with a 40-watt appliance bulb.
5.
Replace light shield in reverse order
Removing the base grille...
To replace:
support
Tabs
1. Line up grille support tabs with metal clips.
2. Pull grille outwards as shown.
3.
Do not remove Tech sheet
fastened behind grille.
2. Push f/rmly to snap into place.
3.
Close the doors.
Ice cube trays.. .
If cubes are not used, they may shrink. The moving
cold air starts a slow evaporation. The longer cubes
are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Slightly twist.