Filter
Top Products
Unplug Electric
Plug From Wall
CONNECTING ICE MAKER
TO FREEZER WALL
2
Remove Plugs and-
Cover From Freezer
Wall
Snap off wiring/entrance lab
3 Remove Plugs From -
I
r Refrigerator Back
Remove screws
save reuse m step 4.
Remove WATER FILL COVER
JUNCTION BOX
yd , HOLECOVER
Remove WIRING
-
CARDBOARD
(or maskrng tape)
lOI prolectlon.
hole on b&k 01 refrigerator. *
Install Water Tube-
#2 (836489)
WATER TUBE
Install
Clips And Shield
Place SHIELD #5 (939025)
over 3 holes in srde sail of
freezer. AHach clap #6 (536533)
and screw #7 (469069)
through each of lop 2 holes
rn shield. Leave screws loose.
must be on lop.
ernstall INTERIOR
-/, TUBE COVER
WIRING ASSEMBLY
(about 4-5 Inches 01 wrrrng assembly
should be rn the freezer compartment.)
CL
up
1 untrl ICE MAKER
IS i ace on SHIELD.
’ Slip TUBE over
WATER INLET
INLET TUBE
I
WARNING-DO NOT PINCH WIRES BETWEEN
BRACKET AND SIDE OF FREEZER.
Rotate CLIPS down and trqhlen SCREWS.
BUCKET
2%
id under
ER.
7
Connect Water Line‘
Between Water Valve
TUBE INSERT
k-- WfRlNG ASSEMBLY
- _--._-
BE ASSEMBLY # 17
TAN WIRE
-3