Whirlpool ED19EK Refrigerator User Manual


 
Using your refrigerator
Air Control
Air Outlet
Power Saving Control
Setting the controls. ;.
Glve the refrigerator time to cool down com-
The Temperature Control is in the refrigerator and
pletely before adding food.
[This may take sev-
the Air Control is in the freezer section. When the
era1 hours,)
refrigerator is plugged in for the first time...
These settings should be about right for
5,@,’ ,F5
normal household refrigerator usage.
The controls will be set about right when milk or
juice IS as cold as you like and when ice cream
is firm.
3
Do not block the air outlet on the control panel.
I, Set the TEMPERA-
2. Set the AIR CON-
Blocking it can slow the air movement needed to
TURECONTROI
TROL to 3.
keep temperatures at the level you set.
Changing the control settings.. .
If
you
need to adjust temperatures In the refrrger-
l
Adjust the Temperature Control frrst.
ator or freezer, use the settrngs lrsted In the chart
l
Wait at least 24 hours between adjustments.
below.
l
Then adjust the Arr Control, if needed.
I
CONDITION:
-1
If Refrigerator
Section IS
TOO WARM
If Freezer
Section IS
TOO WARM
REASONS:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
RECOMMENDED SETTINGS:
Temperature Control
4
Air Control
3
Temperature Control
3
Air Control
4
QUESTIONS? ___i
[can’t cycle often enough)
n
. ..call your
If Refrigerator
COOL-LINE Section is
Controls not set correctly
for your conditions
Temperature Control
2
Air Control 3
I
service
TOO COL-D
assistance
telephone
If ICE isn’t
Heavy ice usage
Temperature Control
3
number
MADE FAST ENOUGH
Very cold room temperature
Arr Control
4
(page 15).
EOTH SECTIONS
(can’t cycle often enough)
Door opened often
Temperature Control
3
are TOO WARM
Large amount of food added
Air Control
2
Very warm or very cold
Power Saving Control.. .
The Power Saving Control
on the Control Con-
sole operates electric heaters around the door
1. Use the “OFF” set-
2. Use the “0N”setting
openings. These heaters help keep moisture from
ting when humidity
if moisture forms
forming on the outside of the refrigerator.
IS low.
on the outside of the
I
refrigerator.