Whirlpool ED20ZK Freezer User Manual


 
Using the automatic ice maker
(Factory-installed on EDZZZR, optional on EDZOZK)
Here are a few things you will want to know
about your automatic ice maker:
l The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically.
UP to shut off the ice maker.
NOTE:
Do not turn ice maker on until it is
connected to the water supply.
Instruc-
tions for ice maker water supply hook
up are attached to the back of the
refrigerator cabinet.
l
For EDSOZK only:
The dial or lever on the
side of the ice maker changes the size of
the cubes. Contact dealer for ice maker
accessory kii number.
l It is normal for ice crescents to be attached
by a corner. They break apart easily.
l The ice maker will not operate until the
freezer is cold enough to make ice. This
can take overnight.
l If ice is not being made fast enough and
more ice is needed, turn the Refrigerator
Control toward a higher number. Wait a
day and, if necessary, turn the Freezer
Control toward C.
l Good water quality is important for good
ice quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals (such as salt from a
malfunctioning softener) can damage the
ice maker mold and lead to poor ice
quality. If a softened water supply cannot
be avoided, make sure the water softener
is operating properly and well maintained.
UP to
stop ice
maker.
DOWN
to
start ice
maker.
13