Filter
Top Products
To change light below ice bin:
1.
Disconnect refrigerator from power supply.
2. Push in sides of light shield until it snaps
free.
3. Replace bulb with a 40-watt appliance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
To change light behind quick freeze
compartment (on some models):
1.
Disconnect refrigerator from power
supply*
2. Lii and secure quick freeze compartment
door.
3. Remove light shield by pulling top for-
ward.
4. Replace bulb with a 40-watt appliance
bulb.
5. Replace light shield.
6. Reconnect refrigerator to power supply.
To change dispenser area light:
1.
Disconnect refrigerator from power supply.
2. Reach through dispenser area to remove bulb.
3. Replace with a heavy-duty lo-watt bulb,
which can be purchased from your
Whirlpool dealer.
4. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs
will fii your refrigerator. Be sure to replace
a
bulb with one of the same size and shape.
Light
below
ice bin
I
Light dehind
quick freeze
compartment
Dispenser
aree light
21