Filter
Top Products
Usln Your Refrigerator
Cont nued B
Glass shelves are
heavy. Be careful.
6
Exterior moisture control
The Exterior Moisture Control on the Control
Console operates electric heaters around the
door openings. These heaters help keep
moisture from forming on the outside of the
refrigerator.
1. Use
the
OFF
setting when humidity is low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator.
Adjustlng the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hotd bottles, milk and other heavy food
items.
To remove glass shelves:
1. Remove items from shelf.
2. Tilt up at front.
3.
Lift up at back
4. Pull shelf straight out.
To replace glass shelves:
1.
Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removlng and adjustlng the freezer shelves
To remove the shelves:
1.
Lii right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.
To adJust the shelves:
1.
Remove shelf as above.
2. Remove supports by sliding upward.
3. Relocate supports on desired level.
4. Replace shelf.
NOTE: The cup-shaped supports go in the back
of the freezer.
Removlng the freezer door shelves (ED22PQ)
Shelves can be removed for easier cleaning.
To remove door shelves:
1.
Grasp shelf at both ends.
2.
Lii up and pull out.
To replace door shelves:
1. Insert hooks into guides on both sides.
2. Push down to lock in place.
Adjustlng the refrigerator door blns
To remove door blns:
1. Liibinup.
2. Pull bin straight out.
To replace door blns:
1.
Slide bin in above desired support button.
2. Push down until it stops.
NOTE:
Large bins are designed to fit in the top
portion of refrigerator door only.