Filter
Top Products
Pull out to the stop,
Ilfl the front
and pull agaln.
llfl the bame front,
then the bade.
Pull out to the stop, IR the
front and pull agaln.
Adjusting the bln and shelf glides
The bin and shelf glides can be used to secure
odd-shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along bin or shelf track.
Removlng the crisper, meat drawer and
covers
To remove the crisper:
1.
Slide straight out to the stop.
2. Lii the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the covers:
1.
Push up glass insert from bottom, then slide
out with both hands.
2. Lift front of mver frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal cover support.
To replace the covers:
1.
2.
3.
Replace metal cover support on wall supports
in front section of cabinet.
Fii back of corners into notch supports on
walls of refrigerator, then lower into place.
Slide back of glass insert into place, then
bwer
front.
Adjustlng the crisper humldlty control
You can control the amount of humidity in the
moisture-sealed crisper.
1.
2.
3.
The control can be adjusted to any setting
between LOW and HIGH.
LOW (open) lets moist air out of the crisper for
best storage of fruits and vegetables with
skins.
HIGH (dosed) keeps moist air in the crisper
for best storage of fresh, leafy vegetables.
Adjustlng the meat drawer temperature
Cold air flows against the meat drawer through
an opening between the freezer and the refrigera-
tor. This helps keep the meat drawer colder than
the rest of the refrigerator.
Slide the control to let more cold air through.
7