Whirlpool ED25DW Refrigerator User Manual


 
Changing the light bulbs...
To change refrigerator light:
1.
Reach behind the control console to find bulb.
2. Remove bulb.
3. Replace with a 40-watttubularappliance bulb.
To change light behind quick freeze com-
portment:
1.
Lift and secure quick freeze compartment door,
2. Remove light shield by pulling top forward.
3. Replace bulb with a 40-watt appliance bulb.
4. Replace the light shield.
To change dispenser light:
1.
Reach the bulb through the dispenser area
2. Replace with a heavy duty IO-watt bulb.
Removing the base grille...
To remove the grille:
To change crisper light:
1.
Pull top of light shield forward until it snaps free.
2. Lower light shield to clear bottom supports.
3. Pull light shield straight out to remove.
4. Replace bulb with a 40-watt appliance bulb.
5. Replace light shield in reverse order,
To change light below ice bin:
1.
Push in sides of light shield until it snaps free.
2. Replace bulb with a 40-watt appliance bulb.
3. Replace the light shield.
r
METAL CLIPS
\
SUPPORT TABS
SUPPORT TABS
1.
Open the doors.
2. Pull grille outwards as shown.
3.
Do not remove Tech sheet
fastened behind
grille.
To replace the grille:
4. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3.
Close the doors.
8