Filter
Top Products
Using your refrigerator
Temperature Control
\
Air Control
Air Outlet
Power Saving Control
Setting the controls.. .
The Temperature Control is in the refrigerator and
the Air Control is In the freezer section When the
refrigerator is plugged in for the first time..
54@21 l95
3
1, Set the TEMPERA-
2. Set the AIR CON
TURE CONTROL to 3
TROL to 3.
Changing the control settings.. .
If you need to adjust temperatures In the refrrger-
ator or freezer, use the settrngs lIsted in the chart
below.
CONDITION :
If Refrrgerator
Section Is
TOO WARM
If Freezer
Section is
TOO WARM
QUESTIONS?
. ..call your
If Refrigerator
COOL-LINE ’ Section is
service
TOO COLD
assistance
If ICE isn’t
telephone
MADE FAST ENOUGH
number
(page 181
If BOTH SECTIONS
are TOO WARM
Give the refrigerator time to cool down com-
pletely before adding food.
[This may take sev-
eral hours )
These settings should be about right for
normal household refrigerator usage.
The controls will be set about rrght when milk or
juice IS as cold as you like and when ice cream
IS
firm.
Do
not block the air outlet on the control panel.
Blockrng It can slow the air movement needed to
keep temperatures at the level you set
l
Adjust the Temperature Control first
l
Wait at least 24 hours between adjustments.
l
Then adjust the Air Control, If needed.
I
REASONS:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your conditrons
Heavy Ice usage
Very cold room temperature
[can’t cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
Power Saving Control.. .
The Power Saving Control
on the Control Con-
sole operates electnc heaters around the door
openrngs. These heaters help keep moisture from
forming on the outside of the refrigerator.
OFF
@elm
RECOMMENDED SETTINGS:
Temperature Control
4
Atr Control
3
Temperature Control
3
Air Control
4
Temperature Control
2,
Air Control
3
Temperature Control
3
Air Control
4
Temperature Control 3
Arr Control
21
1 Use the “OFF” set-
ting when humidity
IS low
2. Use the “0N”setting
if moisture forms
on the outside of the
refrigerator.