Filter
Top Products
Adjusting the refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator. Glass shelves are strong
enough to hold bottles milk, and other
heavy food items.
To remove the shelves:
1. Remove items from the shelf.
2. Tilt shelf up at front.
3. Lift shelf up at back.
4. Pull shelf straight out.
To replace the shelves:
1. Guide the rear shelf hooks into the slots
in the shelf supports on the back liner
wall.
2. Tilt front of shelf up until hooks drop into
slots.
Glass shelves are heavy. Be careful.
3. Lower front of shelf to a level position.
Removing the crisper and crisper cover
To remove the crisper:
1.
2.
3.
4.
Slide the crisper straight out to the stop
Lift the front slightly.
Slide out the rest of the way.
Replace in reverse order.
To remove the cover:
1. Hold cover firmly with both hands and lift
front of cover off supports.
2. Lift cover out by pulling up and out.
To replace the cover:
1.
2.
Fit back of cover into notch supports on
walls of refrigerator.
Lower front into place.
Pull out to the
stop, lift the front
and pull again.
Lift the cover
front, then
the back.
11