Filter
Top Products
Using your refrigerator
Light Switch
Temperature Control
Setting the control...
The Temperature Control for the refrigerator and
Give the refrigerator time to cool down com-
freezer is in the refrigerator in the top right hand corner.
pletely before adding food.
[This may take several
When the refrigerator is plugged in for the first time:
hours.]
l
Set the TEMPERATURE
CONTROL to 3.
Thls setting should be about right for normal
household refrigerator usage.
Thecontrol will be set about right when milk orjuice
is as cold as you like and when ice cream is firm.
I
Power Saving Control...
The Power Savlng Control
on the Control Console
operates electric heaters around the door openings.
These heaters help keep moisture from forming on the
outside of the refrigerator
I. Use the “OFF”
I
setting when
1
I(
ho omir4ii-u ic IAW
I ,“I I #lull, 1.J l”““,
2.
Use the “ON” setting
if moisture forms on-
the outside of the
I
refrigerator.
Changing the light bulb...
WARNING: Before removing the light bulb, either
unplug the refrigerator or disconnect
the electrlclty leading to the re-
frigerator at the maln power supply.
Shock and InJury can occur if elec-
trlcity remains connected.
Unplug the refrlgemtor first.
1. Reach behind control console to find bulb
2. Remove bulb.
3. Replace with a 40-watt appliance bulb.
Adjusting the shelves...
I. First, remove food from shelf.
2. Slide shelf straight out to stop
3. Lift front.
4. Slide the rest of the way out.
Replaclng Shelt:
1. Fit back of shelf on top of guides
on the bottom of guides.
2. Lift front, slide shelf in until it clears
Guide Stop
Shelf Stop
with wire stops
guide stops.
w ‘Shelf Gulde
5