Using your refrigerator
REFRIOERATOR CONTROL
POWER SAVER COWTROL
LIQHT SWITCH FREEZER COHTROL
Setting the controls...
Controls forthe refrigerator and freezer are in the
refrigemtor. When the refrigemtor is plugged in for
the first time...
I
IEPllGElATon
. W..Yll . coLDEn.
1.
Set the REFRIGERA-
TOR CONTROL to 3.
2. Set the FREEZER
CONTROL to
B.
Olve the rdrlgerafor tlme to cool down com-
pletely before addlng food. (This may take sev-
emi hours.]
These sefflngs should be about right for nor-
mal household retttgerator usage.
The controls will be set about right when milk or
t;c$ is as cold as you like and when ice cream is
Changing the control settings...
l Adjust the Refrigerator Control first.
if you need to adjust temperatures in refrigerator
l Wait at least 24 hours between adjustments.
or freezer, use the settings listed in the chart below.
l Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION:
REASON:
CONTROL SElTINoS:
if Refrigerator
Door opened often
Refrigemtor
Section is
Large amount of food added Freezer
d
TOO WARM
Room tempemture too warm
if Freezer
Door opened often
Refrigemtor
Section is
Large amount of food added Freezer
:
TOO WARM
Very cold room temperature
QUESTIONS?
(can’t cycle often enough]
. ..caii your
if Refrigerator
Controls not set correctly Refrigemtor 2
FeTAtNE” Section IS
for your conditions Freezer B
TOO COLD
assistance
telephone
if ICE isn’t
Heavy ice usage
Refrigerator
3
number
MADE FAST ENOUGH
b&y cold room temperature
Freezer
A
(page 15).
(can’t cycle often enough]
if BOTH SECTIONS
Door opened often
Refrigemtor
4
are TOO WARM
Large amount of food added
Freezer
B
Very warm or very cold
room temmratures
Power Saver Control...
The Power Saver Control on the Control Console
1.
Use the “CONSUMES LESS ENERGY” setting when
operates electric heaters around the door open-
humidity is low.
ings. These heaters help keep moisture from form-
2. Use the “REDUCES EXTERIOR MOISTURE” setting if
ing on the outside of the refrigerator. moisture forms on the outside of the refrigerator.
Powta SAVE”
The indicator light will glow when the switch is in
.CONwMtl LESS ENllCI . “LKDXS Lxn?moa )LoLlruu.
the “REDUCES EXTERIOR MOISTURE” position.
--
5