Filter
Top Products
Solving common ice maker problems
PR’OBLEM POSSIBLE CAUSE/SOLUTION
Ice crescents attached l This is normal. They break apart easily. Shake bin occasion-
at corners
ally to keep cubes SeDarated.
Ice maker will not
operate or ice is not
made fast enough
l ON/OFF lever is in the OFF (up) position. Lower lever to the
ON (down) position.
l Freezer is not cold enough. Adjust temperature controls and
wait 24 hours. (See “Changing the control settings” on
paw 9.)
Off-taste or odor in ice l New plumbing connections can cause discolored or off-
flavored ice. Discard the first few batches of ice.
l Cubes are stored too long. Throw them away and make a
new supply.
l Foods in freezer are not wrapped properly. See “Food
Storage Guide” on pages 19 and 20.
l Freezer and ice bin need to be cleaned. See pages
15 and 16.
Changing the light bulb
Electrical Shock Hazard
Unplug refrigerator before removing
light bulb.
Failure to do so can result in death
or electrlcal shock.
To change refrigerator light:
1. Unplug refrigerator.
2. Reach behind Control Panel to
remove bulb.
3. Replace with a 40-watt appliance bulb.
4. Plug in refrigerator.
NOTE: Not all appliance bulbs will fit your
refrigerator. Be sure to replace a bulb with
one of the same size and shape.
13