Filter
Top Products
Changing the light bulb.. .
WARNING: Betore removing the light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the re-
frigerator at the maln power supply.
Shock and injury can occur it elec-
trfclty remains connected.
1. Reach behind control console to find bulb
2. Remove bulb.
3. Replace with a 40-w&t appliance bulb.
Moving the meat pan and cover...
Pull Out to Stop. Litt the
Glass is heavy.
Front
and Pull AgaIn.
Be Caretul.
Cover
Frame
Frame
support
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough to
hold bottles, milk and other heavy food items.
Gloss shelves are
heavy Be careful.
Removlng the Meat Pan:
I. Slide the meat pan out to stop.
2. Lift the front.
3. Slide pan the rest of the way out.
4. Replace in reverse order.
Removlng the cover:
I, Push up glass insert from bottom, then slide out
with both hands.
2. Lift cover frame out of frame support.
3. Tilt front of frame support up, lift at back, and pull
support straight out.
4. Replace in reverse order
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
lo replace:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing crispers and crisper cover...
Pull Out to Stop. Litt the Front
Removing the Crispers:
1. Slide crisper straight out to stop, lift front, then slide
the rest of the way out.
2. Replace in the reverse order
Removing Cover:
1. Push up glass insert from bottom, then slide out
with both hands.
2. Lift front of cover frame and remove cover support.
3. Lift out cover frame by pulling up and out.
Replacfng Cover:
1. Fit back of cover into notch supports on walls of
refrigerator, then lower front into place.
ront, 2. Replace cover support with the long tab
towards the front.
Note:
If the support needs
adjustment, turn base right to raise, or left to lower.
3. Slide back of glass insert into place, then lower front.
6