Filter
Top Products
Changing the light bulb...
\‘I?&
1. Reach behind the control console to find bulb.
2: Remove bulb.
3 Replace with a 40-watt appliance bulb.
Moving the meat pan and cover...
TO remove the meat pan and cover:
PULL OUT TO STOP. LlFl THE
FRONT AND PULL AGAIN.
IS HEAVY.
EFUL.
1. Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight out.
To replace the meat pan and cover:
1. Guide the rear hooks of cover into the slots in the
shelf supports.
2. Tilt up front of cover until rear hooks drop into
slots. Lower front of cover to level posltion.
3. Replace meat pan in reverse order of removal.
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
To remove glass shelves:
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
1. Tilt up at front.
2. Lift up at back.
GLASS SHELVES ARE
HEAVY. BE CAREFUL.
3. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing crispers and crisper cover...
To remove the crispers:
1 OUT TO STOP,
LIFT THE FRONT
AND PULL AGAIN
6
1. Slide crisper straight out to stop, lift front, then
slide the rest of the way out.
2. Replace in the reverse order.
To remove the cover:
1. Push up glass insert from the bottom, then slide
out with both hands.
2. Lift front of cover frame and remove cover
support.
3. Lift out cover frame by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls of
refrigerator, then lower front into place.
2. Replace cover support with the long tab
towards the front. NOTE: If the support needs
adjustment, turn base right to raise, or left to
lower.
3. Slide back of glass insert into place, then lower
front.