Whirlpool ET18XK Refrigerator User Manual


 
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator, Model ETlBVK has glass shelves.
Glass shelves are heavy. Be careful.
Moving the meat pan and cover...
The meat pan can be taken out and moved the
same way as the shelves. Remove the meat pan
first.
1. Reach behind the control console to find bulb.
2. Remove bulb.
3. Replace with a 40-watt appliance bulb.
To remove shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing crispers and crisper cover...
To remove the meat pan and cover:
1. Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight out.
To replace the meat pan and cover:
1. Guide the rear hooks of cover into the slots in the
shelf supports.
2. Tilt up front of cover until rear hooks drop into
slots. Lower front of cover to level position.
3. Replace meat pan in reverse order of removal.
i-
P:;L OUT TO STOP LlFl THE FRONT
n’ND PULL AGAIN
zw 7 LIFT THE FRAk’iE FRONT,
-
BE CAREFUL.
6
To remove the crispers:
1. Slide crisper straight out to stop, lift front, then
slide the rest of the way out.
2. Replace in the reverse order
To remove the cover:
1. Push up glass insert from bottom, then slide out
with both hands.
2. Lift front of cover frame and remove cover
support.
3. Lift out cover frame by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls of
refrigerator, then lower front into place.
2. Replace cover support with the long tab
towards the front NOTE: If the support needs ad-
justment, turn base right to raise, or left to lower.
3. Slide back of glass insert into place, then lower
front.