Filter
Top Products
Using your refrigerator
REFRIGERATOR- CONTROL
POWER SAVING CONTROL
LIGHT SWITCH FREEZER~CONTROL
Setting the controls...
Controls forthe refrigerator and freezer are in the
Give the refrigerator time to cool down com-
refrigerator, When the refrigerator is plugged in for
pletely before adding food. (This may take sev-
the first time...
1.
Set the REFRIGERA-
These settings should
be about right for
nor-
TOR CONTROL TO 4.
mal household refrigerator usage.
2. Set the FREEZER
The controls will be set about right when milk or
ice is as cold as you
like and when ice cream is
Refrigerator Control adjustments range from 1 to
8. Freezer Control adjustments range from A to D.
+,*. ,ijl ,rr/ ..,,. ^ .~
.-.
Changing the control settings...
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart below.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
QUESTIONS?
. ..call your
If Refrigerator
COOL-LINE” Section is
service
TOO COLD
assistance
telephone
If ICE isn,;- “’ “.---
number
MADE FAST ENOUGH
(page 151. . . ..- i il .._.
If BOTH SECTIONS.
are TOO WARM
REASON:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
RECOMMENDED
CONTROL SETTINGS:
.*
Refrigerator 6
Freezer D
Refrigerator
4
Freezer
A
Refrigerator
2
Freezer
A
Heavy ice usage
Very cold room temperature
(can’t cycle often enough]
Door obened often
Large amount of food added
Very warm or very cold
room temperatures
&
Refrigerator
4
Freezer
A
Refrigerator
6
Freezer
C
Thn DA-~- Caving Control on the Control Con-
II 1.G TV”-, “,
sole annmtes
.-.-
-r-.-.--
electric heaters around the door
C.
)oeninas. These heaters helo keep moisture from
formingon the outside of the refrigerator.
1. Use the “CONSUMES LESS ENERGY” setting when
humidity is low.
2. Use the “REDUCES EXTERIOR MOISTURE” setting i
moisture forms on the outside of the refrigerator