Whirlpool ET22DQ Freezer User Manual


 
Adjusting the lateral-adjust shelf
To slide shelf side-to-side:
1.
Lii slightly on shelf front.
2. Slide to desired location.
3. Lower shelf front to level position.
NOTE: You
do not have to remove small
items from the sheff before moving it side-to-
side. You may need to remove larger items.
To remove the shelf:
1. Remove all items from the shelf.
2. Hold back of shelf with one hand.
3. Lii front of shelf to 45” angle.
4. Lower shelf slightly to release shelf from
upper channel of track. Then pull shelf
straight out.
NOTE:
Shelf is heavy. Make sure you use
both hands when removing shelf.
To remove shelf track:
1.
Lii both sides of track slightly.
2. Pull track straight out.
To replace shelf track:
1.
Guide track hooks into the shelf support
slots on the back wall of the cabinet.
NOTE:
Make sure all three track hooks
are in slots and that the slots are parallel
to each other.
2. Push track backward and down.
3. Check that track is completely seated in
the sheff supports.
10
Lift front slightly.
Then slide to new location.
Upper channel
HoM with both hands
and lift front to 45” angle.
Hold both sides and lift up and out.
Make
sure all 3
sets of
hooks
are in
support
slots.
!‘Shelf
support