Whirlpool ET22DQ Freezer User Manual


 
Solving common ice maker problems
PROBLEM CAUSE
SOLUTION
Ice crescents
l
This is normal
l
They break apart easily.
attached at
l
Shake ice bin occasionally to keep cubes sepa-
corners
rated.
Ice maker
l
ON/OFF lever in the
won’t
l
Move ON/OFF lever to the ON (down) position.
OFF (up) position
make ice
l
Freezer not cold
l
Ice maker will not operate until freezer is coM
enough
enough to make ice. This coukf take overnight.
Off-taste or
l
Ice attracts airborne
odor In ke
l
Dump old ice and make a new supply. Store
odors; old ice
excess ice in a covered container.
l
Poor water quality
l
Water containing minerals (such as sulfur) may
require a filter. Try to avoid softened water
supplies.
l
Good water quality is important for good ice
quality. Try to avoid connecting the ice maker to a
softened water supply. Water softener chemicals
(such as salt from a malfunctioning softener) can
damage the ice maker mold and lead to poor ice
quality. If a softened water supply cannot be
avoided, make sure the water softener is operat-
ing properly and well maintained.
l
Foods not properly
l
Wrap food properly. See pages 24 and 25.
wrapped
l
Ice bin and freezer
l
Clean freezer and ice bin. See cleaning chart on
need cleaning
page
21.
l
Plumbing to ice
l
Follow Installation Instructions for proper ice
maker
maker water supply hookup. (See back of refrig-
erator cabinet.) Try to avoid softened water
supply*
l
New ice maker
l
First few batches of ice from a new ice maker
may have an off-taste. Dump ice and make a new
supply.
14