Filter
Top Products
Setting the controls
Controls for the refrigerator and freezer are in the
refrigerator. To adjust a control, reach under the
console and turn the knob. When the refrigerator
is plugged in for the first time:
1. Set the Refrigerator Control to 4.
2. Set the Freezer Control to C.
Give the refrigerator time to cool down
completely before adding food. (This may take
several hours.)
These settings should be about right for normal
household refrigerator usage.
The controls will be set about right when milk
or juice is as cold as you like and when ice cream
is firm.
Refrigerator Control adjustments range from
1 to 8. Freezer Control adjustments range from
A to D.
Changing the control settings
If you need to adjust temperatures in refrigerator or
freezer, use the settings listed in the chart below. If
you have questions, call your COOL-LINE@ serv-
ice assistance number (see page 14).
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION:
REASON:
CONTROL SETTINGS:
If Refrigerator
Door opened often
Section is
Large amount of food added
TOO WARM
Room temoerature too warm
Refrigerator 6
Freezer
D
If Freezer
Section is
TOO WARM
If Refrigerator
Section is
TOO COLD
If ICE isn’t
MADE FAST ENOUGH
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
Refrigerator 4
Freezer
A
Refrigerator 2
Freezer
A
Heavy ice usage
Very cold room temperature
(can’t cycle often enouah)
Refrigerator 4
Freezer
A
If BOTH SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very warm or very cold room
temoeratures
Refrigerator 6
Freezer C
5