Filter
Top Products
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator Glass shelves are strong enough to
hold bottles, milk and other heavy food (terns
G/cm shelves ore
heavy Be
careful
Moving the meat pan.. .
The meat pan can be taken out and moved the
same way as the shelves. Remove the meat pan first
I
To remove glass shelves:
1 Tilt up at front.
2 Lift up at back.
3 Pull shelf straight out
To replace:
I. Gurde the rear hooks into the slots In the shelf
supports
2 Tilt up front of shelf until hooks drop into slot Lower
front of shelf to level positron
Removing:
1 Slrde the meat pan out to stop
2 Lrft the front of meat pan
3 Slrde pan the rest of the way out
4 Tilt cover up at front
5 Lrft up at back.
6 Pull strarght out
Replaclng:
1 Guide the rear hooks Into the slots In the shelf
supports.
2 Tilt up front of cover untrl rear hooks drop Into slots.
Lower front of cover to level positron
3 Replace meat pan In reverse order.
Removing the crispers and crisper covers...
Removing crispers:
? Skde cnspers stratght out to stop
2
Lift
the front
3 Slrde the rest of the way out
4 Replace in reverse order
the Cover.
Removing covers:
Covers are held In by two pegs at the back and t’*L
notched tabs in front
1 Press front out of wav
t ~?ecessar~~. the center leg can be made shorter or
2 Lift cover front
orjger to help level the crisper covers Turn the leg
3 Loft back out of pegs
clxkwnlse to make
I+
longerTurn the leg counterclock-
4 Replace In reverse order
w se ts shorten it
Adjusting the door bins...
support slot
The 4 door bins are adystable to meet your Storage
needs
To remove door bins:
I. Lift front of bin slightly.
2 Slide bin out of support slot
3. Replace in reverse order
Removing the freezer shelf...
’ Loft front slightly
2 Loft back off supports
.3 Replace In reverse order
litt the Front
Then the Back