Filter
Top Products
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
To remove shelves:
your refrigerator.
1.
Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace shelves:
I. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing and adjusting the freezer shelf...
To remove the shelf:
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order.
To adjust the shelf:
1. Remove shelf.
2. Remove supports by sliding upwards,
3. Replace supports on desired level.
4. Replace shelf.
Removing the crispers and crisper cover...
PULL OUT TO THE STOP, LIFT THE FRONT
AND PULL AGAIN.
To remove the crispers:
1. Slide crisper straight out to the stop, lift front, then
slide the rest of the way out.
REMOVE THE
GLASS INSERT,
LlFl THE FRAME FR
THEN THE BACK.
Moving the meat drawer and cover
. . .
2. Replace in reverse order.
To remove the cover:
1. Push up glass insert from bottom, then slide out
with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal cover support
To replace the cover:
1. Replace metal cover support on wall supports
in front section of cabinet.
2. Fit back of corner into notch supports on walls of
refrigerator, then lower into place.
3. Slide back of glass insert into place, then lower
front.
PULL OUT TO THE STOP, LIFI THE
FRONT AND PULL AGAIN.
To remove the meat drawer:
1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide the drawer the rest of the way out.
4. Replace in reverse order.
To remove the cover:
ss IS HEAVY. 1. Tilt front of cover up, lift at back, and pull straight
out.
6
2. Replace in reverse order.