Filter
Top Products
Changing the light bulb...
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you
use your refrigerator. Model ET18GK has glass
shelves. Glass shelves are heavy. Be careful.
Moving the meat pan and cover...
The meat pan can be taken out and moved the
same way as the shelves. Remove the meat pan
first
1. Reach behind the control console to find bulb.
2. Remove bulb.
3. Replace with a 40-watt appliance bulb.
To
remove the shelves:
1. Tilt up at front.
2. Loft up at back.
3. Pull shelf straight out.
To replace the shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
To remove the meat pan and cover:
1. Slide meat pan out to the stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight out.
To replace the meat pan and cover:
1. Guide the rear hooks of cover into the slots in the
shelf supports.
2. Tilt up front of cover until rear hooks drop into
slots. Lower front of cover to level position.
3. Replace meat pan in reverse order of removal.
Removing crispers and crisper cover...
To remove the crispers:
PULL OUT TO THE STOP. LIFT THE
PULL AGAIN.
LIFT THE FRAME
FRONT,
1. Slide crisper straight out to the stop, lift front, then
slide the rest of the way out.
2. Replace in reverse order.
To remove the cover:
1. Push up glass insert from the bottom, then slide
out with both hands.
2. Lift front of cover frame and remove cover
support.
3. Lift out cover frame by pulling up and out.
To
replace the cover:
1. Fit back of cover into notch supports on walls of
refrigerator, then lower front into place.
2. Replace cover support with the long tab toward
the front. NOTE: If the support needs adjust-
ment, turn base right to raise, or left to lower.
3. Slide back of glass insert into place, then lower
front