Filter
Top Products
Changing the light bulb.. .
Unplug the refrigerator first.
I. Reach behind control console to find bulb.
2. Remove bulb.
3. Replace with a 40.watt appliance bulb.
Adjusting the shelves.. .
Removing:
I, Slide meat pan out to stop.
2. Lift the front of meat pan.
3.
Slide pan the rest of the way out.
4. To remove cover, lift it straight up and out.
Replaclng:
I, To replace cover, fit notches in cover sides over
center shelf support.
2. Lower cover into place.
3. To replace pan, fit edges of pan into supports on
cover.
4. Slide meat pan into place.
Guide Stol
P
Shelf Stop
1, First, remove food from shelf.
2. Slide shelf straight out to stop.
3. Lift front.
4.
Slide the rest of the way out.
Replaclng Shelf:
1. Fit back of shelf on top of guides with wire stops
on the bottom of guides.
2. Lift front, slide shelf in until it clears guide stops.
Shelf Guide
Removing crispers and crisper cover. . .
Removing the Crispers:
I, Slide crisper straight out to stop, lift front, then slide
Lift the Front, Then the Back.
the rest of the way out.
2. Replace in the reverse order
Removing Cover:
I, Lift front and remove the cover support
2. Lift out cover by pulling up and out.
Replacing Cover:
I, Fit back of cover into notch supports on walls of
refrigerator, then lower front into place.
2. Replace cover support with the long tab towards
the front. Note: If support needs adjustment, turn
base right to lower, or left to raise.
Pull out to stop.
lift the Front and Pull Again.
Removing and adjusting the freezer shelf . . .
To remove shelf:
I, Lift front slightly.
2.
Lift back off supports.
L h!
3.
Replace in reverse order
To adjust shelf:
1. Remove shelf.
2. Remove supports by sliding upwards.
3. Replace supports on desired level.
4. Replace shelf.
6
I