Filter
Top Products
PROBLEM
POSSIBLE CAUSE
SOLUTION
Bumer
Burner ports are clogged.
Clean with a straight pin (see pages
flames are
19 and 23). lf thii fails, call an
uneven
authorized Roper service technician
for service.
Burner
Air/gas mixture is incorrect.
Contact an authorized Roper service
namer lift off
technician to check air/gas mixture.
I=% am
yellow, or
an
nolsy
when turned
Off
Burner makes Bumer is wet from washing.
Let dry.
popping ft0b
when on
Control
You are not pushing in before
Push control knob(s) in before
knob(s) will turning.
turning to a setting.
not turn
Cooking
The range is not level.
Level range. (See Installation
results are
InstnJctions.)
not
what you
expected
The oven temperature seems
Adjust the oven temperature control.
too bw or too high.
(See “Adjusting the oven temperature
controronpage13.)
The oven was not preheated as
Preheat oven if called for in recipe.
the recipe calls for.
The recipe has never been
Use only tested recipes from a
tested or is not from a reliable reliable source.
source.
Thepansarenotthetypeor
size recommended in the
recipe.
There is not proper air circula-
tion around pan when baking.
Refer to a reliie cookbook for
recommended pan type and size.
Allow 1% to 2 inches (4-5 cm) on all
sides of the pans for air circulation.
There must be a minimum space of
1 inch (2.5 cm).
Flame size does not fii the
cooking utensil being used.
When broiling, you have not
completely closed the broiler
drawer.
Adjust flame size to fit cooking
utensil.
Completely cbse broiler drawer.
25