Filter
Top Products
Adjusting the lateral-adjust shelf
To slide shelf side-to-side:
1.
Lift slightly on shelf front.
2. Slide to desired location.
3. Lower shelf front to level position.
NOTE: You do not have to remove small
items from the shelf before moving it side-to-
side. You may need to remove larger items.
To remove the shelf:
1.
Remove all items from the shelf.
2. Hold back of shelf with one hand.
3. Lift front of shelf to 45” angle.
4. Lower shelf slightly to release shelf from
upper channel of track. Then pull shelf
straight out.
NOTE: Sheff is heavy. Make sure you use
both hands when removing shelf.
Lii front alightly.
Then slide to new location.
Upper
Hold with both
and lift front to 45’ angle.
To remove shelf track:
1.
Lii both sides of track slightly.
2. Pull track straight out.
Hold both sides and
lift up and out.
To replace shelf track:
1.
Guide track hooks into the shelf support
slots on the back wall of the cabinet.
NOTE: Make sure all three track hooks
are in slots and that the slots are parallel
to each other.
2. Push track backward and down.
3. Check that track is completely seated in
the shelf supports.
Make
8ure all
3 sets of
hooks
are in
support
Shelf
\ mlpport
10