Whirlpool B2lDK Freezer User Manual


 
To
reinstall shelf:
1.
Hold shelf at front and back.
2. Tilt front of shelf up to a 45” angle to
track.
3. Insert both rear shelf slides into upper
channel of track.
4. Lower front of shelf to a level posit-on.
NOTE: Make sure both rear shelf slides are
securely in the track before letting go of
sheff.
Upper channel
of track
Insert rear ohelf
elides into
upper channel
of track.
Adjusting the cantilever refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy
food items.
To
remove glass shelves:
1.
Remove items from shelf.
2. Tilt shelf up at front.
3. Lii back of shelf.
4. Pull shelf straight out.
To
replace glass shelves:
1.
Guide the rear shelf hooks into the slots
in the shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into
slots. Lower front of shelf to level position.
Glass shelves are
heavy. Be careful.
Using the egg bin
The egg bin has three pieces -the lid, the
egg carrier, and the bin. Use the egg bin to
hold one, two or three dozen eggs.
To hold one dozen eggs:
Place
a
dozen eggs into the egg carrier.
Then place the egg carrier into the bin and
cover with the lid.
To hold two dozen eggs:
Place two dozen eggs loose in the bin and
cover them with the lid. Use the carrier to
transport eggs between the bin and your
cooking area.
To hold three dozen eggs:
Place two dozen eggs loose in the bin.
Invert the lid and place it on the bin. Place a
dozen eggs, in the carton, on top of the lid.
Use the carrier to transport eggs between
the bin and your cooking area.