Whirlpool G7CE3034XB Cooktop User Manual


 
9
Hot Surface Indicator Lights (on Standard Control models)
The Hot Surface Indicator Lights will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area(s) is turned off.
If the cooktop is on when a power failure occurs, the Hot Surface
Indicator Lights will remain on after the power is restored to the
cooktop. They will remain on until the cooktop has cooled
completely.
Power Light
Each cooktop has a Power On light. The light will glow when any
burner is on.
Dual/Triple-Circuit Element
(on some models)
The dual-size and triple-size elements offer flexibility depending
on the size of the cookware. Single size can be used in the same
way as a regular element. The dual and triple sizes combine
single, dual and outer element and are recommended for larger
cookware, large quantities of food, and home canning.
Triple Element (on some models)
Dual Element
To Use SINGLE:
1. Push in and turn knob from the OFF position to the SINGLE
zone anywhere between Low and High.
2. Turn knob to OFF when finished.
To Use DUAL and TRIPLE:
1. Push in and turn knob from the OFF position to the DUAL or
TRIPLE zone anywhere between Low and High.
2. Turn knob to OFF when finished.
Bridge Element
(on some models)
The bridge element allows flexibility in the left side cooking area.
Use the bridge area to create an oblong heated area to cook with
large cookware.
Use the bridge element to create an oblong heated area to cook
with oblong pans.
To use SINGLE (C):
1. Push in and turn front left knob from OFF position to the
SINGLE zone anywhere between Low and High.
2. Turn knob to OFF when finished.
To use SINGLE and BRIDGE area (C + B):
1. Push in and turn front left knob from OFF position to the
BRIDGE zone anywhere between Low and High.
2. Turn knob to OFF when finished.
To use SINGLE (A):
1. Push in and turn rear left knob from OFF position anywhere
between Low and High.
2. Turn knob to OFF when finished.
To use both Single elements and Bridge (A + B + C):
1. Turn on Single and Bridge (C + B).
2. Turn on Single (A).
3. Turn knobs to OFF when finished.
A. Single size
B. Dual size
C. Triple size
A. Single size
B. Dual size
A. Triple zone
B. Dual zone
C. Single zone
Hot Surface
A
B
C
A
B
A
B
C
A. Single size
B. Bridge area
C. Single size
A
B
C