Filter
Top Products
Before starting your dishwasher
OPTION SELECTOR BUTTONS
,
1. Read “Important Safety Instructions” on page
2 before starting your dishwasher.
2. Spin the Upper and Lower Spray Arms to
make sure nothing will stop them from turning
freely.
3. Push door firmly when closing and itwill auto-
matically latch.
4. Run hot water, at sink where dishwasher will
be connected, until it is hot. Turn off water. See
page 15 for connecting instructions.
Starting your dishwasher CYCLE SE&OR ~~~~~~
POTS & PANS cycle...
1. Push POTS & PANS Cycle Selector Button.
2. Push button(s) for option(s) desired.
3. Turn Cycle Control Knob clockwise to dot
marked POTS & PANS.
- POTS & PANS and HEAVY WASH Cycles
share the same spot on the dial. The Cycle
Selector Button determines which cycle
operates.
The dishwasher will automatically start that
cycle.
HEAVY WASH cycle...
1. Push HEAVY WASH Cycle Selector Button.
2. Push button(s) for option(s) desired.
3. Turn Cycle Control Knob clockwise to dot
marked HEAVY WASH.
- HEAVY WASH and POTS & PANS Cycles
share the same spot on the dial. The Cycle
Selector Button determines which cycle
operates.
The dishwasher will automatically start that
cycle.
NORMAL WASH cycle... LOW ENERGY WASH cycle...
1. Push NORMAL WASH Cycle Selector Button.
1. Push LOW ENERGY WASH Cycle Selector
2. Push button(s) for option(s) desired.
Button.
3. Turn Cycle Control Knob clockwise to dot
2. Push button(s) for option(s) desired.
marked NORMAL WASH. The dishwasher will 3. Turn Cycle Control Knob clockwise to dot
automatically start that cycle. marked LOW ENERGY WASH. The dishwasher
will automatically start that cycle.
RINSE & HOLD cycle...
1. Push NORMAL WASH Cycle Selector Button,
2. Select AIR DRY Option only.
3. Turn Cycle Control Knob clockwise to dot
marked RINSE St HOLD. The dishwasher will
automatically start that cycle.
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145°F (63°C) in both
washes and the last rinse (marked ‘1.
Cycle time will be about 1% to 2
hours, depending on time needed
to heat water.