Filter
Top Products
9
2. Press the Temp/Time “up” arrow pad to change the
temperature unit setting.
“CELSIUS. Press (^) for Fahrenheit” will scroll twice from right
to left in the lower text area.
3. “CELSIUS Selected” will scroll right to left in the lower text
area. The temperature units have been changed.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
■ Valid pad press
■ End of Kitchen Timer (long tone)
■ Function has been entered
■ Oven is preheated
Three tones
■ Invalid pad press
Four tones
■ End of cycle
Adjusting Sound On or Off
The oven sound is factory set for On but can be changed to Off.
1. Press SETTINGS twice until “SOUND” appears in the upper
text area and “ON. Press (^) for OFF” scrolls twice from right
to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to turn the sound Off.
“OFF. Press (^) for ON” will scroll twice from right to left in the
lower text area. The sound has now been turned off.
3. “OFF Selected” scrolls from right to left in the lower text area.
The sound has now been turned off.
Adjusting Sound Volume
The oven sound is factory preset for High but can be changed to
Low.
1. Press SETTINGS 3 times until “SOUND VOLUME” appears in
the text area and “HIGH. Press (^) for LOW” scrolls twice
from right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to turn the sound Low.
“LOW. Press (^) for HIGH” scrolls twice from right to left in the
lower text area.
3. “Low Selected” scrolls twice from right to left in the lower text
area. The sound volume has now been changed.
Adjusting End Tone On or Off
The end tone is factory set for On but can be changed to Off.
1. Press SETTINGS four times until “END TONE” appears in the
upper text area and “ON. Press (^) for OFF” scrolls twice from
right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to turn the end tone off.
“OFF. Press (^) for ON” will scroll twice from right to left in the
lower text area. The end tone has now been turned off.
Adjusting Keypress Tone On or Off
The keypress tone is factory set for On but can be changed to
Off.
1. Press SETTINGS five times until “KEYPRESS TONE” appears
in the upper text area and “ON. Press (^) for OFF” scrolls
twice from right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to turn the keypress
tone Off.
“OFF Selected” will scroll twice from right to left in the lower
text area. The keypress tone has now been turned off.
Adjusting Reminder Tone On or Off
The reminder tone is factory set for On but can be changed to
Off.
1. Press SETTINGS six times until “REMINDER TONE” appears
in the upper text area and “ON. Press (^) to OFF” scrolls
twice from right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to turn the reminder
tone Off.
“OFF Selected” will scroll twice from right to left in the lower
text area. The reminder tone has now been turned off.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To Change the Clock to 24-Hour Format:
1. Press SETTINGS seven times until “12/24 HOUR” appears in
the upper text area and “12HR. Press (^) for 24Hr” scrolls
twice from right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad once to select 24 hour
and again to select 12 hour.
3. Wait 30 seconds or press CANCEL to accept the setting.
To Set the Clock:
Before setting, make sure the oven and Kitchen Timer are off.
1. Press CLOCK. “Set Time” appears in the upper text area.
2. Press the Temp/Time “up” or “down” arrow pads until the
desired time is displayed.
3. “Press CLOCK” appears in the upper text area and “PUSH
START” scrolls from bottom to top in the lower text area.
4. Press CLOCK or START. “Time Set” will scroll from top to
bottom in the upper text area for 5 seconds. Once it
disappears, the time is set.
Sabbath Mode
Sabbath Mode configures the range to conform to Star-K Jewish
Sabbath requirements for a Bake cycle, including Timed Bake or
Delayed Bake functions. Refer to the “Sabbath Mode” section for
a full description of this feature.