Filter
Top Products
16
Direct Wire Method
Power Supply Cord Method
5. Reconnect power or plug in dishwasher.
Check Dishwasher Operation
1. Read the User Instructions that came with your dishwasher.
2. Check that all parts have been installed and no steps were
skipped.
3. Check that you have all the tools you used.
4. Start the dishwasher and allow it to complete the shortest
wash cycle.
5. After 2 minutes, unlatch the door. Wait 5 seconds, and then
open the door.
6. Check to see that there is water in the bottom of the
dishwasher tub.
7. Check that the dishwasher is working properly.
If you need Assistance or Service
Please reference the “Assistance or Service” section of your User
Instructions or contact the dealer from whom you purchased your
dishwasher.
WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.