Filter
Top Products
5
*Always refer to Service Sheet and Use and Care Manual for information specic to the refrigerator you are servicing.
Installing Ice Maker Assembly
Rest the ice maker on the top
shelf. Connect wire harnesses.
Tilt the ice maker assembly
and insert the lip on the right
hand side of the assembly
into the channel on the cover.
After positioning the right side of
the ice maker, raise the left side
and align the hanger bracket on the
cabinet stud.
If the ice maker is
installed properly,
the hole in the ice
maker assembly
should align with
the hole on the top
of the cabinet.
Insert ¼” screw.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.