Filter
Top Products
15
*Always refer to Service Sheet and Use and Care Manual for information specic to the refrigerator you are servicing.
Control Assembly
1. Unplug refrigerator or disconnect power.
2.
3.
4.
5.
WARNING
DANGER
DANGER
Electrical Shock Hazard
Only authorized technicians should perform
diagnostic voltage measurements.
Failure to follow these instructions can result in
death or electrical shock.
After performing voltage measurements,
disconnect power before servicing.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
19
Voltage Measurement Safety Information
When performing live voltage measurements, you must do the following:
� Verify the controls are in the off position so that the appliance does not start when energized.
� Allow enough space to perform the voltage measurements without obstructions.
� Keep other people a safe distance away from the appliance to prevent potential injury.
� Always use the proper testing equipment.
� After voltage measurements, always disconnect power before servicing.
Voltage Measurement Safety Information
When performing live voltage measurements, you must do the following:
� Verify the controls are in the off position so that the appliance does not start when energized.
� Allow enough space to perform the voltage measurements without obstructions.
� Keep other people a safe distance away from the appliance to prevent potential injury.
� Always use the proper testing equipment.
� After voltage measurements, always disconnect power before servicing.