Filter
Top Products
29
*Always refer to Service Sheet and Use and Care Manual for information specic to the refrigerator you are servicing.
Water Filter Status Light:
The water filter status light will help you know when to change your water filter.
When the dispenser control panel’s water lter status display changes to “ORDER,” this tells you
that it is almost time to change the water filter cartridge.
Replace the water lter cartridge when the water lter status display changes to “REPLACE.” The
filter should be replaced at least every 6 months, depending on your water quality and usage.
Note: If water flow to your water dispenser or i
ce
maker decreases noticeably, change the filter
sooner.
After changing the water filter, reset the status light.
Details:
Pressing and holding RESET FILTER starts the 3,2,1 second countdown. Using the dispenser
cancels the countdown AND no dispensing is permitted. The number ‘3’ blinks 3 times and the
‘invalid’ tone sounds 3 times and user has to release both the pad and the button and press the
button again to start it over
After 3 seconds, the BLUE WATER BARS in the Icon fl
ash
and an audible tone sounds three times.
When the system is reset, the “ORDER” and “REPLACE” icons will disappear from the display
screen. See figure 16.
Note: Users can reset the filter status at any stage.
Figure 16
LIGHT MAX ICE LOCK
Hold 3 Sec.
TEMPERATURE
Hold 3 Sec.
RESET FILTER
Hold 3 Sec.
ICE MODE
Order
Replace
KitchenAid Stealth Control Overview and
Programming Instructions (continued)
Water Filter Status Light:
The water lter status light will help you know when to change your water lter.
When the dispenser control panel’s water lter status display changes to “ORDER,”
this tells you that it is almost time to change the water lter cartridge.
Replace the water lter cartridge when the water lter status display changes to
“REPLACE.” The lter should be replaced at least every 6 months, depending on your
water quality and usage. Note: If water ow to your water dispenser or ice maker
decreases noticeably, change the lter sooner.
After changing the water lter, reset the status light.
Details:
Pressing and holding RESET FILTER starts the 3 second countdown. Using the dis-
penser cancels the countdown and no dispensing is permitted. The number ‘3’ blinks
3 times and the ‘invalid’ tone sounds 3 times and user has to release both the pad
and the button and press the button again to start it over
After 3 seconds, the BLUE WATER BARS in the Icon ash and an audible tone will
not sound three times. When the system is reset, the “ORDER” and “REPLACE”
icons will disappear from the display screen. See gure 16.
Note: Users can reset the lter status at any stage.