Filter
Top Products
The Cooktop light:
Electrical Shock Hazard
Turn ott power ai maln
power supply betore re-
placlng the light bulb.
Failure to do so could re-
sutt In electrlcal shock.
The Oven light:
2.
Remove the five screws
holding the bottom panel
in place.
3. Lower the front of the
panel. Slide the panel
forward to remove.
2.
Remove the vent cover
4. Remove bulb holder
mounting screws,
mounting screw.
Electrical Shock Hazard
Turn otl Dower at maln
3. Tip the cover forward, then
lift out to remove.
I
power siupply before re-
placlng the light bulb.
Failure to do so could re-
sult In electrical shock.
4. Remove shipping tape from
bulbs - if still in place -
before removlng bulbs.
5. We recommend replaclng
bulb(s) with candelabra
base 30-watt bulb(s) avail-
able from your authorized
Ropep service company
(Part No. 4158432).
6. Replace the bottom panel
in reverse order.
tl i
6. We recommend replacing
bulb(s) with candelabra
base 30-watt bulb(s) avail-
--.
able from your authorized
5. Slide bulb holder out,
then turn towards front to
remove bulb from oven.
Roper servrce company
(Part No. 4158432).
7. Replace the bulb holder
and mounting screw
8. Slide the top of the vent
cover into place. Push the
bottom until it snaps into
place. Replace the mount-
ing screws. Turn the power
back on at main power
supply.
21