Filter
Top Products
Using Your Microwave Oven
Microwave oven controls
There are three parts in the control section:
-
Digital Display/Clock and Indicator Lights
- Command Pads
- Number Pads
Instructions for each control are covered on
the following pages. Read them carefully.
When you first plug in the oven, a tone will
sound, the display will show “0” and the colon
will flash. If after you set the Clock (page 10-11)
the Display again shows a “O”, it means your
electricity was off for a while. Reset the Clock.
Digital display/clock and indicator lights
When you are not using the microwave oven, this
is an accurate digital clock.
When you are using the microwave oven, it
display time settings, temperature settings, and
Indicator Lights.
Command pads
Touch Command Pads to tell the microwave oven
what to do and in what order. A few examples:
- CLOCK SET tells the oven you are going to set
the clock.
- START tells the oven to start.
(See page 10 for information on the tone you
hear when touching any pad.)
Each Command Pad (except START, CANCEL,
and CLOCK SET) lights an Indicator Light when
you touch the Command Pad.
While the oven is running, an Indicator Light
(or lights) will be on to show what the oven is
doing.
Number pads
Once you’ve touched a Command Pad to tell the
oven what you want it to do, you’ll touch Number
Pads to tell it
-
a time,
- a Cook Power.