Filter
Top Products
Using your microwave oven
Microwave oven controls
There are three parts in the control section:
-Digital Display/Clock, and Indicator Lights
-Command Pads
-Number Pads
Instructions for each control are covered on
the following pages. Read them carefully.
When you first plug in the oven, a tone sounds
and the Display shows 88:88. If after you set the
Clock (page 61, the Display again shows all S’s,
it means your electricity was off for a while.
Reset the Clock.
Digital display/clock and indicator lights
Command pads
When you are not
using the micro-
wave oven, this is an
accurate digital
clock. When you are
using the micro-
wave oven, it dis-
plays time settings,
indicator lights and
shows what number
pads you touched.
Touch Command
Pads to tell the
microwave oven
what to do and in
what order. A few
examples:
-CLOCK SET tells
the oven you are
See page 6 for information on the
tone.you hear when touching any pad.
Each Command Pad (except START, CANCEL, and
CLOCK SET) lights an Indicator Light when you
touch the Command Pad.
While the oven is running, an Indicator Light
(or lights) will be on to show what the oven is
doing.
Number pads
Once you’ve
touched a Com-
mand Pad to tell
the oven what you
want it to do, you’ll
touch Number
Pods to tell it...
- 0 time,
-a Cook Power,