Filter
Top Products
d
QWI-I
The Display counts down the time
to show how much time is left in the
first cycle.
When the cooklng time ends, “End”
will show on the Dlsplay and 4 beeps
will sound. (Ya
IU can stop the beeplng
by openlng the door or by touching
CANCEL.) “End” will remaln on the Dls-
olav and a remlnder tone will sound
&rY 30 seconds until the door Is
opened or CANCEL Is touched. The
Dlspiay wlli then show the time of day.
Changing the cooking time
Cooking time can be changed any time before touching START or during the cycle:
1. Touch COCK 1.
2. Touch numbers for the new time.
3. Touch START.
Cook 1 will continue cooking for the new time.
lower cook powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the
slower the cooking. Each Number Pad also stands for a different percentage of Cook Power.
Many recipes in your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to
use. Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.] or
percentage (lo%, 50%, 80%, etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and
Cook Power name usually used.
automatic 100% of full power HIGH
9 = 90% of full power
8 = 80% of full power
7 = 70% of full power MED-HIGH
6 = 60% of full power
5 = 50% of full power MED
4 = 40%
of full power
3 = 30%
of full power
MED-LOW
2 = 20%
of full power
1 = lO%of full power LOW
0 = TIMER (fan and light will be err]
DO THIS...
1.
Put food in the oven and close
the door.
THIS HAPPENS...
The COOK 1 Indicator Light will
come on and the Display will show
four 0’s.
3. Touch Number Pads for the
cooking time you want.
The Display will show the numbers
you touched
in the order you
touched them.
This example shows
7 minutes, 30 seconds.