Changing the pre-programmed setting
You can change the pre-programmed cooking time and Cook Power in AUTO SET to the
time and power you most often use. To change the AUTO SET setting, follow these steps.
1.
Touch AUTO SET twice.
2. Touch the Number Pads for the new desired cooking time. If high Cook Power is desired,
skip to Step 5.
3. Touch COOK POWER.
4. Touch the Number Pad for the desired Cook Power.
5. Touch AUTO SET. Touch CANCEL. The oven will remember that time and Cook Power
for future use.
NOTE: If electric power ever goes off, the oven will go back to the
pre-programmed 2 minutes, 30 seconds at high Cook Power setting.
Defrosting
Use QUICK DEFROST to thaw frozen food before cooking. For suggested defrost times, see the
guide behind the oven door or the chart in your MICRO MENUS@ Cookbook.
DO THIS... THIS HAPPENS...
1.
Put, frozen food in the
oven
and
close the door.
l
m
.
‘.
2.
Touch QUICK DEFROST.
The QUICK DEFROST Indicator Light
will come on and the Drsplay w~li
show four O’s
3. Touch Number Pads for the
defrostlng tlme you want.
The Display will show the number
you touched
in the order you
touched them.
This example shows
2 minutes, 30 seconds.
4.
Touch START.
The QUICK DEFROST Indicator Light
will stay on to show that the oven is in
the Quick Defrost Cycle
The Display counts down the time to
show how much defrosting time is left
When the defrost time ends, “End” will
show on the the Display and 4 beeps
will sound. (You can stop the beeping
by opening the door or by touching
CANCEL.) “End” will remain on the Dis-
play and a reminder tone will sound
every 30 seconds until the door is
opened or CANCEL is touched. The
Display will then show the time of day.