Filter
Top Products
0
A
9. Touch a Number Pad for the
Cook Power you want in the
second cycle.
The Display will show what you
touched. This example shows you
touched Number Pad 4 for 40% of
full power.
10. Touch START.
d
COJnt
own
d
count
own
When you touch START, the COOK1
Indicator Light will stay on
while the oven is cooking in
the first cycle. The COOK POWER
Indicator Light will be on if
You are using a Cook Power
other than high. All other
Indicator Lights will go off.
The Display counts down the
cooking time to show how much
time is left in the first cycle,
For 2 of every IO seconds, the
Display will show the Cook
Power you selected, if you are
using a Cook Power other than
high.
You will hear 2 beeps at the
end of Cook 4. You can either
open the door to check, stir or
turn the food, etc., or you can
let the oven start the next
cycle. If you do open the door,
touch START after closing the
door to restart the oven.
The COOK 2 Indicator Light will
be on during the second cycle.
The COOK POWER Indicator Light
will also be on if you are using
a Cook Power other than high.
The Display counts down the
time to show how much time is
left in the second cycle.
For 2 of every 10 seconds, the
Display will show the Cook
Power you selected, if you are
using a Cook Power other than
high.
When Cook 2 ends,“End” will show
on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching
CANCEL.] “End” will remain on the Dis-
play and a reminder tone will sound
every 30 seconds until the door is
opened or CANCEL is touched. The
Display will then show the time of day.