Filter
Top Products
2.
Touch AUTO SET.
(Optlon: Sklp to step 6 if
you want to use the preset
cooklng tlme and Cook
Power.)
The AUTO SET Indicator Light will
come on and the Display will show
2 minutes, 30 seconds (or the time
you have set as your favorite
cycle).
LI
A
The Display will show what you
touched in even minutes. This
example shows 4 minutes.
3. Touch a Number Pad for the
new cooking tlme you want
from 1 to 9 mlnutes.
. .
m
‘, -
4.
Touch COOK POWER.
(Optlon: Sklp to Step 6 If
you want to cook at hlgh
power.)
The COOK POWER Indicator Light
will come on and the Display will
show “P-HI:’
5. Touch a Number Pad for the
Cook Power you want.
The Display will show what you
touched. This example shows you
touched Number Pad 5 for 50%
of full power.
6. Touch START.
d
count
own
NOTE: You can set COOK 1 or COOK 1 and 2 to follow Auto Set, (See page 13,
14 and
15 for Instructions).
2 r:
The AUTO SET Indicator Light will
stay on while the oven is cooking
in the preprogrammed cycle. If
you selected a Cook Power other
than high, the Cook Power Indicator
Light will also come on.
The Display counts down the time to
show how much cooking time is left.
For 2 of every 10 seconds, the
Display will show the Cook Power
you selected, if you are using a
Cook Power other than high.
When the Auto Set ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching
CANCEL.) “End” will remain on the Dis-
play and a reminder tone will sound
every 30 seconds until the door is
opened or CANCEL is touched. The
Display will then show the time of day.