Filter
Top Products
DO THIS...
THIS HAPPENS...
The PROBE TEMP Indicator Light
will come on and the Display will
4.
Touch PROBE TEMP.
The Display will show the numbers
you touched
in the order you
5. Touch Number Pads for the
desired final temperatures
between 90°F and 200°F.
touched them.
This example shows
a final cooked temperature of
about 140°F
Bi3
. .
‘. -
6.
Touch COOK POWER.
(Option: Touch START if you
want to use high power.)
The COOK POWER Indicator Light
will come on and the Display will
show “P-HI:’ This shows the oven is
pre-programmed to cook at full
(HIGH) power.
m
l
7. Touch the Number Pad for
the
Cook Power you want.
The Display will show what you
touched. This example shows you
touched Number Pad 6 for 60% of
full power.
8. Touch START.
The PROBE TEMP and COOK POWER
Indicator Lights will stay on. The Dis-
play will show “CCCL” to show the
food is less than 90°F As the food
cooks the Display will show the in-
ternal temperature of the food for
every 5°F increase.
For 2 of every 10 seconds, the Dis-
play will show the Cook Power you
selected, if you are using a Cook
Power other than high.
When the probe senses the tempera-
ture you selected, the oven will shut
off. “End” will show on the Display and
4 beeps will sound. (You can stop the
beeping by opening the door or by
touching CANCEL.] “End” will remain
on the Display and a reminder tone
will sound every 30 seconds until the
door is opened or CANCEL is
touched. The Display will then show
the time of day.
NOTE: “ERR” will be displayed after START is touched, if an incorrect temperature
has been selected (under 90°F and over 200°F).
16