Filter
Top Products
Building in your microwave oven
Your microwave oven is not limited to carts, counters or tables. Custom installations are made
easy with kits available from Your dealer.
1. Build the microwave oven into a cabinet or
Ask Your dealer for details on...
wall by itself or over built-in single ovens in the
Whirlpool RDE, REE, RGE. RB and SB model series or
l
832987 -30-inch Built-in Kit
Imperial 7200 single gas ovens
l
832989 - 24-inch Built-in Kit
l
832991-27-inch Built-in Kit
2. Attach the mrcrowave oven to a wall by itself
l
832993 -Wall Mounting Kit
or with cabinets over It. . RH3330XR - MICRO SHELF R Hood
3. Put the microwave oven on the MICRO SHELF*
Use only approved installation kits.
Hood over a cooktop. The hood is available
Obtain these kits from your authorized
ducted or as a recirculating hood, and includes
Whirlpool dealer.
cooktop lights
Caring for your microwave oven
Cleaning the microwave oven
Wrpe often with warm sudsy
water and a soft cloth or
sponge
For stubborn soil, boil a cup
of water in the oven for 2 or 3
minutes Steam
will
soften
the
soil
Be sure to cleyn the areas
where the door and oven
frame touch when closed.
When cleaning surfaces of
door and oven that come to-
gether on closing the door,
use only mild, non-abrasive
soaps or detergents applied
wrth a sponae or soft cloth.
Caution:
Rinse well. -
Abrasive cleansers, steel ‘wool pads, gritty wash cloths. etc can damage the control
panel, electronics, and the interior and exterior oven surfaces Use a soft cloth or a
sponge with a mild detergent or spray glass cleaner
Replacing the light bulb
The microwave oven light should come on whenever the door is opened or the oven is
operating
To replace:
1.
Unplug, or turn off at fuse box or circuit
breaker.
2.
Open the oven door.
3. Remove the 3 screws from the front of the
stirrer cover.
4. Pull down the front portion of the cover.
(It is creased across its width to form a hinge.)
5. Replace bulb with a 25-watt candelabra
base bulb (FSP 313760). Obtain bulb from
Your authorized Whirlpool dealer.
6. Close the cover and replace the screws
7. Plug in, or turn on the marn power supply.